Build free

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic resume example

A resume for a Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic needs to show the work itself: set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces. Day to day that means work like this: verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges; study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements. Recruiters and applicant tracking systems both read for the tasks and tools this role actually involves, so the strongest resume names them in your own experience rather than describing the job in the abstract. Below are the tasks O*NET records for this occupation, the software and tools it uses, the titles it is advertised under, and the skills worth naming if they are genuinely yours.

Also advertised as

The same job is posted under many titles. Searching only your own job title hides most of the openings you could apply to.

  • CNC Machinist
  • Computer Numerical Control Machinist
  • Drill Operator
  • Drill Setup Operator
  • Machine Operator
  • Bore Mill Operator
  • CNC Drilling Operator
  • Drill Press Operator
  • Punch Operator
  • Radial Drill Operator
  • Setup Mill Operator
  • PCB Drill Press Operator
  • PCB Pinner
  • Set Up Tech
  • Automatic Driller and Reamer
  • Automatic Drilling Machine Operator
  • Barrel Driller
  • Billet Driller

O*NET records 40 titles for this occupation in total.

What this work actually involves

Tasks recorded for this occupation, in O*NET's words. If your experience covers one of these, it belongs on your resume in your own words.

  • Verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges.
  • Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
  • Move machine controls to lower tools to workpieces and to engage automatic feeds.
  • Verify that workpiece reference lines are parallel to the axis of table rotation, using dial indicators mounted in spindles.
  • Establish zero reference points on workpieces, such as at the intersections of two edges or over hole locations.
  • Change worn cutting tools, using wrenches.
  • Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machining instructions or knowledge of metal properties.
  • Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
  • Observe drilling or boring machine operations to detect any problems.
  • Lift workpieces onto work tables either manually or with hoists or direct crane operators to lift and position workpieces.
  • Turn valves and direct flow of coolants or cutting oil over cutting areas.
  • Install tools in spindles.

17 tasks are recorded in total; these are the most central.

Example bullets for this role

Built from this occupation's own tasks. The brackets stay empty on purpose: we will not invent a number for you, and a fabricated metric is the fastest way to lose an interview you had already won.

  • Verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges, for [who or what it served], at [what volume].
  • Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements, for [who or what it served], at [what volume].
  • Move machine controls to lower tools to workpieces and to engage automatic feeds, for [who or what it served], at [what volume].
  • Verify that workpiece reference lines are parallel to the axis of table rotation, using dial indicators mounted in spindles, for [who or what it served], at [what volume].

Software used in this role

Recorded for this occupation by O*NET. An applicant tracking system matches the exact product name, so write the tool the way the posting writes it.

  • Automated inventory software
  • Computerized numerical control CNC software
  • Microsoft Excel
  • Microsoft Office software
  • Microsoft Word
  • SAP software

Tools and equipment

The physical equipment this occupation is recorded as using. Worth naming when a posting asks for it by name.

  • Adjustable hand wrenches
  • Adjustable jigs
  • Ball peen hammers
  • Bench grinders
  • Boring tools
  • Computer terminals
  • Computerized numerical control CNC boring machines
  • Computerized numerical control CNC drill presses
  • Deburring tools
  • Dial calipers
  • Digital micrometers
  • Drill presses

Skills an ATS reads for

Worth naming only if they are genuinely yours. Keyword overlap is one input to a resume's score, not a verdict.

  • Automated inventory
  • Computerized numerical control CNC

What this job rates as most important

O*NET rates every skill for importance to this occupation. These are the highest rated, in order.

  1. 01Operations Monitoring
  2. 02Monitoring
  3. 03Operation and Control
  4. 04Reading Comprehension
  5. 05Active Listening
  6. 06Complex Problem Solving
  7. 07Critical Thinking
  8. 08Judgment and Decision Making
  9. 09Speaking
  10. 10Time Management

Knowledge areas

The subject knowledge this occupation draws on, rated by importance.

  • Mathematics
  • Production and Processing
  • Mechanical
  • English Language
  • Engineering and Technology
  • Education and Training
  • Design
  • Administration and Management

What qualifications people in this job have

From O*NET's survey of people doing this work. This is what postholders reported, not a requirement any single employer sets.

  • 57%High School Diploma, or the equivalent
  • 12%Some College Courses
  • 12%Associate's Degree

What level this role is pitched at

O*NET places this occupation in “Some Preparation Needed”. These occupations usually require a high school diploma.

Some previous work-related skill, knowledge, or experience is usually needed. For example, a teller would benefit from experience working directly with the public.

Common questions

What does a Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic do?
Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal or plastic work pieces. Day to day that includes work like verify conformance of machined work to specifications, using measuring instruments, such as calipers, micrometers, or fixed or telescoping gauges and Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications, sequences of operations, setups, or tooling requirements.
What skills should a Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic put on a resume?
O*NET rates Operations Monitoring, Monitoring, Operation and Control, Reading Comprehension, and Active Listening among the most important skills for this occupation. Name the ones that are genuinely yours and show where you used them. A resume that lists skills you do not have is weaker than one that lists fewer.
What software should a Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic list?
Software recorded for this occupation includes Automated inventory software, Computerized numerical control CNC software, Microsoft Excel, Microsoft Office software, and Microsoft Word. Applicant tracking systems match on the exact product name, so write the tool as the posting writes it rather than describing it in general terms.
What other job titles cover Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic work?
O*NET records 40 titles for this occupation, including CNC Machinist, Computer Numerical Control Machinist, Drill Operator, and Drill Setup Operator. Searching only your own job title hides most of the openings you could apply to.
What qualifications does a Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic need?
In O*NET's survey of people doing this job, 57% reported their level of education as "High School Diploma, or the equivalent". That is what current postholders reported, not a requirement any single employer sets.
Will this resume pass an ATS for a Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic role?
No tool outside an employer can tell you how that employer's system is configured, including ours. What you can control is that the resume parses cleanly, names the work in the words the posting uses, and does not claim anything you cannot back up.

Related roles

Occupations O*NET records as closest to this one, and worth looking at if this search is not moving.

What this page cannot tell you

  • No tool outside an employer can tell you how that employer’s ATS is configured, including ours.
  • This page makes no claim about pay, demand or how many people hold this job. O*NET does not publish that here and we will not estimate it.
  • Keyword overlap is one input to a resume’s score, not a verdict on you. A resume that names skills you do not have is worse than one that names fewer.

If this is the job you are aiming at, the guide to tailoring a resume covers how to aim one posting properly, and building and exporting a resume here is free.

Occupation data from the O*NET 29.1 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under CC BY 4.0. O*NET is a trademark of USDOL/ETA. SpartanResume is not endorsed by USDOL/ETA.