Aerospace Engineering and Operations Technologists and Technician resume example
A resume for a Aerospace Engineering and Operations Technologists and Technician needs to show the work itself: operate, install, adjust, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. Day to day that means work like this: test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters; identify required data, data acquisition plans, and test parameters, setting up equipment to conform to these specifications. Recruiters and applicant tracking systems both read for the tasks and tools this role actually involves, so the strongest resume names them in your own experience rather than describing the job in the abstract. Below are the tasks O*NET records for this occupation, the software and tools it uses, the titles it is advertised under, and the skills worth naming if they are genuinely yours.
Also advertised as
The same job is posted under many titles. Searching only your own job title hides most of the openings you could apply to.
- Engineering Technician
- Instrumentation Technician
- Systems Test Technician
- Test Technician
- Avionics Installation Technician
- Avionics Test Technician
- Engineering Test Technician
- Flight Test Instrument Technician
- Aerographer
- Aerospace Assembler
- Aerospace Engineering Technologist
- Aerospace Mechanic
- Aerospace Operations Technologist
- Aerospace Physiological Technician
- Aerospace Technician
- Aircraft Research Mechanic
- Altitude Chamber Technician
- Data Acquisition Technician
O*NET records 28 titles for this occupation in total.
What this work actually involves
Tasks recorded for this occupation, in O*NET's words. If your experience covers one of these, it belongs on your resume in your own words.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Identify required data, data acquisition plans, and test parameters, setting up equipment to conform to these specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Adjust, repair, or replace faulty components of test setups and equipment.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Finish vehicle instrumentation and deinstrumentation.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Design electrical and mechanical systems for avionic instrumentation applications.
Example bullets for this role
Built from this occupation's own tasks. The brackets stay empty on purpose: we will not invent a number for you, and a fabricated metric is the fastest way to lose an interview you had already won.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters, for [who or what it served], at [what volume].
- Identify required data, data acquisition plans, and test parameters, setting up equipment to conform to these specifications, for [who or what it served], at [what volume].
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions, for [who or what it served], at [what volume].
- Confer with engineering personnel regarding details and implications of test procedures and results, for [who or what it served], at [what volume].
Software used in this role
Recorded for this occupation by O*NET. An applicant tracking system matches the exact product name, so write the tool the way the posting writes it.
- Apache Hadoop
- Apache JMeter
- Atlassian JIRA
- Autodesk AutoCAD
- Bugzilla
- C++
- Computer aided design CAD software
- Computerized numerical control CNC software
- Customer information control system CICS
- Dassault Systemes CATIA
- Dassault Systemes SolidWorks
- Data acquisition software
- Debugging software
- Enterprise resource planning ERP software
43 software entries are recorded in total.
Tools and equipment
The physical equipment this occupation is recorded as using. Worth naming when a posting asks for it by name.
- Accelerometer sensors
- Accelerometers
- Adjustable wrenches
- Air drills
- Air-supplying respirators
- Aligning punches
- Alignment squares
- Allen wrenches
- Annealing ovens
- Aviation snips
- Ball peen hammers
- Bench vises
What this job rates as most important
O*NET rates every skill for importance to this occupation. These are the highest rated, in order.
- 01Critical Thinking
- 02Operations Monitoring
- 03Quality Control Analysis
- 04Reading Comprehension
- 05Active Listening
- 06Speaking
- 07Complex Problem Solving
- 08Judgment and Decision Making
- 09Troubleshooting
- 10Monitoring
Knowledge areas
The subject knowledge this occupation draws on, rated by importance.
- Mechanical
- Engineering and Technology
- Mathematics
- Production and Processing
- Customer and Personal Service
- English Language
- Administrative
- Physics
What qualifications people in this job have
From O*NET's survey of people doing this work. This is what postholders reported, not a requirement any single employer sets.
- 39%Post-Secondary Certificate, awarded for training completed after high school
- 33%Associate's Degree
- 20%High School Diploma, or the equivalent
What level this role is pitched at
O*NET places this occupation in “Medium Preparation Needed”. Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate's degree.
Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.
Common questions
- What does a Aerospace Engineering and Operations Technologists and Technician do?
- Operate, install, adjust, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. Day to day that includes work like test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters and Identify required data, data acquisition plans, and test parameters, setting up equipment to conform to these specifications.
- What skills should a Aerospace Engineering and Operations Technologists and Technician put on a resume?
- O*NET rates Critical Thinking, Operations Monitoring, Quality Control Analysis, Reading Comprehension, and Active Listening among the most important skills for this occupation. Name the ones that are genuinely yours and show where you used them. A resume that lists skills you do not have is weaker than one that lists fewer.
- What software should a Aerospace Engineering and Operations Technologists and Technician list?
- Software recorded for this occupation includes Apache Hadoop, Apache JMeter, Atlassian JIRA, Autodesk AutoCAD, and Bugzilla. Applicant tracking systems match on the exact product name, so write the tool as the posting writes it rather than describing it in general terms.
- What other job titles cover Aerospace Engineering and Operations Technologists and Technician work?
- O*NET records 28 titles for this occupation, including Engineering Technician, Instrumentation Technician, Systems Test Technician, and Test Technician. Searching only your own job title hides most of the openings you could apply to.
- What qualifications does a Aerospace Engineering and Operations Technologists and Technician need?
- In O*NET's survey of people doing this job, 39% reported their level of education as "Post-Secondary Certificate, awarded for training completed after high school". That is what current postholders reported, not a requirement any single employer sets.
- Will this resume pass an ATS for a Aerospace Engineering and Operations Technologists and Technician role?
- No tool outside an employer can tell you how that employer's system is configured, including ours. What you can control is that the resume parses cleanly, names the work in the words the posting uses, and does not claim anything you cannot back up.
Related roles
Occupations O*NET records as closest to this one, and worth looking at if this search is not moving.
What this page cannot tell you
- No tool outside an employer can tell you how that employer’s ATS is configured, including ours.
- This page makes no claim about pay, demand or how many people hold this job. O*NET does not publish that here and we will not estimate it.
- Keyword overlap is one input to a resume’s score, not a verdict on you. A resume that names skills you do not have is worse than one that names fewer.
If this is the job you are aiming at, the guide to tailoring a resume covers how to aim one posting properly, and building and exporting a resume here is free.
Occupation data from the O*NET 29.1 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under CC BY 4.0. O*NET is a trademark of USDOL/ETA. SpartanResume is not endorsed by USDOL/ETA.